t4 knocking noise when changing gear » Mortgages » Forum
wr-forum WOW mod

ПоискПоиск   Users   Registration   Entrance
Today: 26.04.2025 - 11:32:32
Pages:  1  

t4 knocking noise when changing gear

Advertising

.
AuthorMessage

coolcar-LESS

user




Statistics:
Messages: 361
Registration: 09.04.2002

hi,my t4 is making a knocking noise when changing gear(more so in the first 3 gears,and sometimes when coming on and off the throttle,ive just had the large engine mount next to the cambelt cover replaced,and the front gearbox mount on the cradle as this was broken,but the noise still remains,any ideas on what it could be,driveshaft,clutch,ive heard of gearchange bushes causing knocking noises,or even the box itself,other than this the car seems in very good health,any advice is appreciated

---------------------
-Mike
Message # 1 24.07.24 - 12:04:50
RE: t4 knocking noise when changing gear

RoyL

user




Statistics:
Messages: 117
Registration: 12.20.2003

If the other mounts were really bad then I would get the two remaining ones changed before anything else as they will be in a similar condition.

---------------------
The most effective way to hide the truth is to make those that see it appear as fools.
Message # 2 24.07.24 - 12:13:21
RE: t4 knocking noise when changing gear

stever

user




Statistics:
Messages: 458
Registration: 12.22.2003

hi dandle,changing the other mounts was an option i considered but i'm not convinced it's them at fault,i believe one is under the airbox is that the best way to access it?and the rear one on the cradle as ive already replaced the front one,i'll try and have a look when i get chance,i don't think that is the cause of the noise though,though i'd like to be proved wrong

---------------------
Message # 3 24.07.24 - 12:18:24
RE: t4 knocking noise when changing gear

DDIZZY

user




Statistics:
Messages: 670
Registration: 06.05.2003

It could be one of the strut top mounts or even an ARB bush causing the noise as well. If the other mounts were bad on the engine/gearbox its likely the two remaining ones won't be in good condition though and i would be inclined to change them first.

---------------------
Message # 4 24.07.24 - 12:22:56
RE: t4 knocking noise when changing gear

Chongus

user




Statistics:
Messages: 2,241
Registration: 10.22.2002

the front gearbox mount the rubber had actually come away and the large one next to the cambelt cover was starting to crack,you may well be right about the other mounts as i do have my suspicions,i need to have the car looked at properly,it gets a bit expensive if you just try to eliminate by just replacing parts

---------------------
Message # 5 24.07.24 - 12:32:44
RE: t4 knocking noise when changing gear

///M3 Saloon

user




Statistics:
Messages: 33
Registration: 03.16.2001

as dandle suggested in an earlier post the remaining engine mounts are probabely going weak as well and there does still seem to be too much movement with the engine and gearbox when changing gear etc,just out of intrest how much are the strut top mounts and what are they like to fit?the clunking noise sounds very low down in the car maybe arb bushes but defineing where a noise is coming from isnt always easy,its driving me up the wall,the only other thing is the water leak in the boot which has several causes,one dry day i may get chance to deal with it!

---------------------
1997 ///M3 Sedan Boston Green ECIS CAI, X-Brace, UUC Trans. Bushings, Bilsteins Click here to see my car
Message # 6 24.07.24 - 12:36:16
RE: t4 knocking noise when changing gear
After DVD Decrypter Rip AutoGK sees no subs : Previous topicNext topic: JS MIDI Plugin: CC Incrementor
Pages:  1  

The administrator has prohibited guests from replying to messages! To register, follow the link: register


Participants